Top 10 Best Miter Gauge For Dewalt Table Saw in 2022

Are you looking for the best Miter Gauge For Dewalt Table Saw? You might find it difficult to determine which products are best to buy. This confusion occurs due to the different types of products that are present in the market.

No need to worry because we are here to help you find the best Miter Gauge For Dewalt Table Saw After hours of research, we have put together a list of products that can be just what you need. We have also included a buying guide and answered some questions to clear any doubts you may have.

Here is our Top 10 Recommendations!

Top 10 Best Miter Gauge For Dewalt Table Saw in 2022

Bestseller No. 1
OEM N507559 Miter Gauge
  • Genuine, OEM Replacement Part
  • Replacement miter gauge, part number N507559
  • Compatible with: DWE7491RS, DWE7491RS
  • Measures approximately 11.53 X 5.33 X 2.23 inches
Bestseller No. 2
DeWalt 5140032-78 Replacement Table Saw Miter Gauge
  • Genuine, OEM Dewalt Replacement Part
  • Dewalt replacement gauge, part number 5140032-78
  • Compatible with: DW745 Type 1, DW745 Type 2, DW745 Type 20, DW745 Type 3, DW745-B2 Type 1, DW745-B2 Type 3, DWE7480 Type 1, DWE7480 Type 20
  • Measures approximately 11.85 X 5.20 X 2.05 inches
Bestseller No. 3
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
Bestseller No. 4
O'SKOOL Replacement Miter Gauge fits DeWalt table saws DWE 7490X Type 1 and Type 2, 7491RS Type 1 and Type 2, 7499GD Type 1and Type 2
  • Includes: (1) Miter Gauge Assembly
  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime.
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L).
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need.
Bestseller No. 5
DEWALT OEM N435108 Miter Gauge Assy
  • Genuine, OEM Dewalt Replacement Part
  • Dewalt replacement miter gauge assy, part number N435108
  • Compatible with: DCS7485T1, DCS7485B, DWE7499GD, DWE7499GD, DWE7491RS, DWE7491RS, DWE7485
  • Measures approximately 12.05 X 5.25 X 2.00 inches
Bestseller No. 6
Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
Bestseller No. 7
Kreg KMS7102 Table Saw Precision Miter Gauge System, Blue
  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
  • Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
Bestseller No. 8
OEM N272579 Replacement Table Saw Miter Gauge Assembly DWE7490
  • Genuine, OEM Dewalt Replacement Part
  • Dewalt replacement miter gauge assembly, part number N272579
  • Compatible with: DWE7490X Type 1, DWE7490X Type 2, DWE7491RS Type 1, DWE7491RS Type 2, DWE7499GD Type 1, DWE7499GD Type 2
  • Measures approximately 12.25 X 5.55 X 2.30 inches
SaleBestseller No. 9
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
  • Table saw that delivers perfect miter cuts the first time
  • Solid-steel laser cut protracter head and gold anodized Track Fence
  • 1 angle stop with indexed stops every 5-degrees
  • Precision angle indexing teeth
  • 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play
Bestseller No. 10
Black & Decker Us Inc #14 Fax Dewalt N272579 Miter Gauge Genuine Original Equipment Manufacturer (OEM) part for Dewalt
  • Genuine, OEM Dewalt Replacement Part
  • Dewalt replacement miter gauge assembly, part number N272579
  • Compatible with: DWE7490X Type 1, DWE7490X Type 2, DWE7491RS Type 1, DWE7491RS Type 2, DWE7499GD Type 1, DWE7499GD Type 2
Bestseller No. 11
Delta Deluxe Miter Gauge Model 34-929 , Black
  • Fits table saws, shapers, band saws and other machines with a 3/8" x 3/4" miter slot-Real little saws may not fit-Guide Bar Length: 18-3/8"
  • The Deluxe Miter Gauge is accurately constructed and equipped with adjustable positive stops at 90, 15, 22.5, 30, 45, and 60, degrees left and right.
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts 34-895/1087652, 50-864/PM-1978, and 34-928.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
  • The 18-3/8" long guide bar offers adjustment screws to custom fit the bar to the miter slot of your machine and eliminate any side-to-side play.
Bestseller No. 12
Aluminium Alloy Miter Bar Rail Miter Guage Bar Slider Table Saw Gauge Rod Wood Working Tool(300mm / 11.81inch)
  • 【Please double check size before your purchase】Width: Approx. 0.748"; Thickness: Approx.0.374"; Length: Approx.17.7", 11.8" (optional) , It can effectively fit dewalt saw table, woodworking table, craftsman table, ryobi 10" table and related saw table.
  • 【Installation is a breeze】Easy assembling, makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
  • 【Fixed tightly, sliding smoothly】These bars slide easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts.
  • 【Reliable and credible quality】Made of high quality aluminium alloy, it is of strong strength and reliable durability for several year using without abusing.
  • 【Satisfaction guarantee】We care for all customer's feeling. If this product does not meet or exceed your expectations, please send it back for a 100% refund no questions asked.
Bestseller No. 13
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
  • Includes (1) 2610011708 Miter Gauge.
  • Genuine Skil Replacement Part.
  • New, Bulk Packed.
  • Cut angles from 0 to 45 degrees.
  • Compatible with Skil 3410 Table Saw only
Bestseller No. 14
Precision Miter Gauge, ANYLION Table Saw Miter Gauge With Laser Marking Scale, Aluminum Table Saw Sled 60°Angled Ends, Table Saw Accessories, Suit for Track Saw
  • 【Precision Miter Gauge】This miter gauge is a a high performance woodworking angle tool with a miter guide which mounts into the miter slots of your table saw, then guides the miter gauge parallel to the blade for high precision angle cuts and crosscuts.
  • 【Precise Angle】Factory calibration, there are 13 stop grooves on the plus and minus(add an often used 22.5°stop grooves), angle guide in 5 ° increments over a full 120 ° range. The table saw sled adopts laser marking technology, which is anti-friction, and the scale is still clear after repeated use.
  • 【Simple & Secure Operation】The solid aluminum miter bar was 17.7” in length and is 0.35” thick by 7” wide, with 3 adjusting screws, which is more convenient to insert into the slot holes and fix the seat.The metal half round head design with the 45° fence, put the cuts needs items next to the fence, then adjust to the right angle, and cut it.
  • 【High Quality】Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. Provide the provide hex key wrench to adjust the plungers, meet your various needs.
  • 【Universal Design】The miter gauge suit for most standard table saw, compatible with popular brand table saws, band saws, router tables, disk and belt sanders, the miter gauges are flat without burr, security, and hands-free. It is currently a must-have for every family.
SaleBestseller No. 15
VEVOR Precision Miter Gauge, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale
  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees.
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting.
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free.
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family.

Things to Consider Before Buying the Best Miter Gauge For Dewalt Table Saw

Now, when you do research prior to buying the best Miter Gauge For Dewalt Table Saw, there are certain things you need to consider. Because these considerations come into play by ensuring that you do not end up with the wrong choice.

Finding the perfect Miter Gauge For Dewalt Table Saw is not rocket science and doesn’t require extensive research. Some important features which you should look out for are described below.

Brands

While there are numerous brands on the market, the truth is not all of them can give you the features you may need.

We’ve done the legwork of locating the most reputable brands around for you. Choosing from these, you’ll be much less likely than going to a store and grabbing something without considering the brand and everything behind it.

Durability

Durability is one of the primary features which are important for most products. They don’t often have long lifespans and require replacement every now then.

Before you buy any product from the store, make sure you know about the material well. Sometimes, many people buy the wrong product even after spending a lot of bucks. Why do they do that? Probably because they don’t know which material ensures ultimate durability.

You should always focus on the quality of a product before getting it. Make sure it’s sturdy and built to last. No matter whether it’s made of wood, metal, plastic, aluminum or steel.

Features of Miter Gauge For Dewalt Table Saw

Before deciding on a specific product, be certain that it has all the necessary features you require.

If you’re unsure concerning something, don’t hesitate to ask the manufacturer. That way, you can make the right purchase that provides precise results.

Quality of the Miter Gauge For Dewalt Table Saw

The quality of the product is an important factor. If you happen to get one with low-quality material, you will have a tough time trying to maneuver them.

Whatever you choose to buy, the quality should be first-rate. You don’t want to waste money on something that looks or feels cheap when what you desire is elegance, coziness, and style.

Cost

Cost shouldn’t be an issue if you’re willing to invest in a high-quality product. An inexpensive product often has great features, so you get great value for your money.

However, expensive products don’t necessarily mean to be of exceptional quality. We prefer to say you select something that fulfills your needs.

Ease of Use

People feel more comfortable using products that come with a straightforward process of use.

So, you should always look for the ones that come with an easy to use process. You can find different designs, so you should choose the one that comes with more convenient features.

Warranty

It is always recommended to have a product with a warranty, however, it’s not compulsory. However, if the brand provides warranties for a certain timeframe, then certainly, it’s a favorable deal.

Size

The product size is one of the most important aspects to consider before purchasing a Miter Gauge For Dewalt Table Saw. You need to know what kind of product you want to buy to best fit your needs.

It is essential to buy a product that addresses your needs based on your product dimensions. Spending money on something you will likely need is a waste of money. You should choose a product that will meet your needs based on its power.

Design

Many products with countless designs are available in the market. Some designs are redundant, and others aren’t as efficient. Make sure you know what you do and whether the tools you choose will help you do your job better.

Safety Measure

No matter how passionate you are about your occupation or work, your safety must always be a top priority. Since you’ll be using Miter Gauge For Dewalt Table Saw make sure it has all the features that ensure the safety of the users. You do not want to experience any kind of accident.

Don’t just pick any brand, no matter how excellent, inexpensive, or available it is. Ensure that safety measures have been considered.

Materials of the Miter Gauge For Dewalt Table Saw

We advise not to buy products from brands that don’t specify the materials they use unless we’re sure the product is made with good quality materials. It’s important to be confident about a purchase before you make one, so when the materials used aren’t clearly specified, it makes us doubt the product’s quality.

It’s imperative to consider what material will work best for your requirements before you make an investment since you could find yourself wasting your money.

Types

As you know by now, there are various types of Miter Gauge For Dewalt Table Saw available in the market. You have to understand the pros and cons of individual types of products before picking the perfect one for your needs.

It is best to compare the advantages with each other before determining the perfect type.

Instruction Manual

Before you can utilize a product, often there are some fundamental guidelines that must be followed to get the most out of it. While some people may be able to just figure it out on their own, others may need an instruction manual.

Instruction manual is designed to provide you with information about how to use the product. The manual also goes over the safety precautions and explains how to recognize potential hazards. So you should buy the product that comes with an instruction manual.

Performance

When you are planning to buy a Miter Gauge For Dewalt Table Saw, you will definitely think of its performance because nobody wants to waste his money buying a wrong product. So, check ins and outs of the Miter Gauge For Dewalt Table Saw from user’s review, forums and expert people before you pick a specific model.

Versatility

It can be frustrating when you buy something and then it turns out three days later that it is not what you need. With a little thought and effort, it is possible to avoid this by purchasing a versatile product that has multiple uses. You can use one product for many purposes. This can save time on products that may not get used up quickly.

You can also use the product in different ways, depending on the need at the time. In this way, you can also save money as you’ll just need to purchase the perfect one.

Accessories

When you are planning to buy a Miter Gauge For Dewalt Table Saw, you will definitely think of the accessories availability in the market. Because anytime soon, it may cause damages due to unwanted accidents at any stage of its usages.

Some products also come in bundles, where they have a combo package of the necessary items that you may need with it.

Colors

Yup, color does matter! When you are planning to buy a Miter Gauge For Dewalt Table Saw from dozens of models, you will definitely wish to get your desired color. As, color is the symbol of choice, aristocracy and represents your personal taste.
We have reviewed some of the best Miter Gauge For Dewalt Table Saw considering this option of course.

Compactness

A Miter Gauge For Dewalt Table Saw is highly compact in order to have a high usage capacity. Compactness also ensures good portability and easy handling of a unit. Because if Miter Gauge For Dewalt Table Saw doesn’t comes handy, you may face it tough to manage while using it.

After reading our buying guide, you will get the answers for the following questions:

  • How much does the best Miter Gauge For Dewalt Table Saw costs?
  • What are the benefits of a Miter Gauge For Dewalt Table Saw?
  • Where to buy the best Miter Gauge For Dewalt Table Saw?
  • What is the best brands of Miter Gauge For Dewalt Table Saw?
  • How long does a Miter Gauge For Dewalt Table Saw last?
  • Does Miter Gauge For Dewalt Table Saw comes with a manufacturer warranty?
  • Are Miter Gauge For Dewalt Table Saw worth it?
  • Wrapping Up!

    Now you have a better idea about the Best Miter Gauge For Dewalt Table Saw. Hopefully, choosing one will be an easy task for you. For the best experience, follow our advice and recommendations. It will help you find the product.

    With that, we would like to conclude here by wishing you good luck.

    Click Here to Leave a Comment Below 0 comments